
So I tried it quite a few times and here are some of the results after post-processing:







The rest of the images can be found with my other motorbike images here.
Somewhat-Infrared Motorcycles (Dial-Up Warning)Moderators: Greg B, Nnnnsic, Geoff, Glen, gstark, Moderators
Forum rules
Please note that image critiquing is a matter of give and take: if you post images for critique, and you then expect to receive criticism, then it is also reasonable, fair and appropriate that, in return, you post your critique of the images of other members here as a matter of courtesy. So please do offer your critique of the images of others; your opinion is important, and will help everyone here enjoy their visit to far greater extent. Also please note that, unless you state something to the contrary, other members might attempt to repost your image with their own post processing applied. We see this as an acceptable form of critique, but should you prefer that others not modify your work, this is perfectly ok, and you should state this, either within your post, or within your signature. Images posted here should conform with the general forum guidelines. Image sizes should not exceed 950 pixels along the largest side (height or width) and typically no more than four images per post or thread. Please also ensure that you have a meaningful location included in your profile. Please refer to the FAQ for details of what "meaningful" is.
Previous topic • Next topic
15 posts
• Page 1 of 1
Somewhat-Infrared Motorcycles (Dial-Up Warning)I figured I'd try something while I shot pictures of the motorcycles... I tried holding the IR filter, which is a 52mm filter, on top of the much larger filter on the 12-24... and this is what I got:
![]() So I tried it quite a few times and here are some of the results after post-processing: ![]() ![]() ![]() ![]() ![]() ![]() ![]() The rest of the images can be found with my other motorbike images here. Producer & Editor @ GadgetGuy.com.au
Contributor for fine magazines such as PC Authority and Popular Science.
Dats Kool, feels like i am peering through another dimension, the blurry fingers ont he outside give a nice soft contrast to the circular peephole into the uberzone, not to sure about the subject mater though.
well executed abstractobatics from you again.
I think these are my favourite if the nnnnsic experiments so far... very cool
New page
http://www.potofgrass.com Portfolio... http://images.potofgrass.com Comments and money always welcome
Very interesting and creative Leigh. Believe it I still haven't had a chance to use my IR filter I bought months ago. Incredible but true. Will most certainly do that during my holidays after you rekindled my interest Leigh. Ta
![]() cheers marco
Leigh
These look even better than they did on the back of the camera. I think the most interesting are the last two. Peter
Disclaimer: I know nothing about anything. *** smugmug galleries: http://www.stubbsy.smugmug.com ***
I agree with others, I think the last two are the best, becasue they actually showing the IR effect. The others look like normal BW. Very intersting photos and effects.
Mal
I've got a camera, it's black. I've got some lens, they are black as well.
does the extreme blowout have any effect on the sensor? kinda like using night vision glasses in daylight
Life's pretty straight without drifting
http://www.puredrift.com
Doesn't seem to. Just blows them way out. Producer & Editor @ GadgetGuy.com.au
Contributor for fine magazines such as PC Authority and Popular Science.
Alas, a step-down ring is something I haven't acquired yet... but at this point, after this experiment, I'm inclined not to get one because of how successful this experiment was. A few of my friends are going down to the beach this week and, aside for all the Bondi "rules and regulations," I'm inclined to take my camera down and try some IR photography using this technique at the beach. I've been itching to repeat the phrase "public domain" over and over again. ![]() ![]() ![]() And it's an R72 filter that Wendell is kindly letting me borrow. ![]() Producer & Editor @ GadgetGuy.com.au
Contributor for fine magazines such as PC Authority and Popular Science.
Do you mind sharing how you get rid of the red cast?
I'm not someone who touches IR colour.
In the digital world, it doesn't interest me, especially with the internal IR filter inside our camera stopping us from really achieving true infrared. In the digital world, IR black and white piques my interest especially because I'm mostly a black and white photographer anyway, so to get rid of the red cast, you convert the part that is infrared (in my images, that's where the filter was used inside the image... in most others, it'll be the entire image) to black and white. You can do this however you please... desaturating, lab colour conversion, effects filters... whatever your way normally is will work. Typically, in IR, you're supposed to frame the shot first without the IR filter, shoot it, then screw the filter on, and shoot that... and then blend the images. Another way is changing the white balance either on the camera or on the computer to achieve a different sort of colour spectrum. But being a black and white person, this doesn't particularly interest me as much as a black and white image does. Producer & Editor @ GadgetGuy.com.au
Contributor for fine magazines such as PC Authority and Popular Science.
Really like the 4th one, I have tried stuff like this shooting through a sunglass lens.
President, A.A.A.A.A (Australian Association Against Acronym Abuse)
Canon EOS R6, RF 24-105 F4, RF 70-200 F4, RF 35mm F1.8, RF 16mm F2.8 "And ye shall know the truth, and the truth shall make you free." (John 8:32)
Previous topic • Next topic
15 posts
• Page 1 of 1
|