Camera Flash Bracket - Manfrotto 233B
Softbox - 60cm bowens sofbox, with speedring (would work with any softbox/speedring so long as it had a threaded hole, 3/8" or 1/4")
TTL cord for flash to camera hotshoe - SC29
Mounting plate for flash inside softbox - Hama 6861
Flash - SB600
1. Screw the speedring, and Hama plate together using a spigot (I used 1/4").
![Image](http://www.pbase.com/oz_beachside/image/76080086/medium.jpg)
2. Screw the SC29 onto the other end of the Hama plate.
![Image](http://www.pbase.com/oz_beachside/image/76080089/medium.jpg)
3. Mount the Flash onto the hotshoe cord, and connect the softbox to the speed ring.
![Image](http://www.pbase.com/oz_beachside/image/76080082/medium.jpg)
4. Turn the head of the flash back into the reflective part of softbox. This is a pic before the front difuser goes back on the softbox
![Image](http://www.pbase.com/oz_beachside/image/76080098/medium.jpg)
5. Have fun with it!!!